Click on the MaxboltTM Load Indicating Fastener to see it in operation.  This video clip will show how the MaxboltTM is capable of indicating dynamic loading.  Notice the indicating movement as Engine RPM rises.

Maxbolt^TM Load Indicating Fastener

 
Maxbolt^TM load indicating fasteners continuously displays the amount of tension in a bolt or stud. They offer a simple method for accurate joint assembly, and it is the only product available (for most applications) that will continuously monitor clamping force while the fastener is in service.

Maxbolt^TM load indicating fasteners are manufactured by inserting extremely accurate and durable load monitoring devices into high quality bolts and studs. Now, even inexperienced workers can complete complex assemblies with full assurance that fasteners are at the proper tension. The Maxbolt^TM also provide in-service monitoring which will warn users of any loosening in order to avoid premature wear, unnecessary downtime, or catastrophic failure.

Our Maxbolt^TM Load Indicating Fasteners comes in various shapes and sizes.  It can be manufactured from standard ANSI materials to exotic materials. 

torque control, torque control method, tightening bolts, tightening fastener, tightening fastener control, tightening fasteners control, tightening bolt control for off-shore cranes, tightening control for off shore crane bolts, tightening method for turbine case bolts, method of torquing bolts, new bolt design eliminate the use of torque wrenches and other imperfections in the tightening of small to large diameter bolts or fasteners.  torquing a bolt, bolt stress, bolt tension, bolt stretch, bolt load, tension control, tension bolt, bolt load verification, turbine casing bolts, ultrasonic bolt, ultrasonic bolt alternative, stretch control.  Off-shore oil rigs, chemical flanges, bolts used for various industry require exact tension and uniformed loading on bolts, we have the solution for critical joints, exact bolt loading, torque and the conditions of a fastener are no longer a concern.  Any tightening tools may be used in bolting load indicating fasteners.  Large compressor bolts, heat exchangers, rotating equipment can easily use load indicating fasteners to extend the life of these equipment.

Maxbolt, bolts, bolt, fastener, fasteners, 4140 material, 4340 material, inconel, monel, stainless, steel, steels, quality, Load, indicating, bolts, fastener, capscrew, maxbolt, studs, dti, superbolt, rotabolt, super nut, load cell, robust load cell, heat exchanger, flange, flanges, sch 120, schedule, Y, flexible graphite, braided packing, compression pump shaft packing, valve stem packing, valve stem, non-asbestos gasketing, pump shaft seals, calgraph, texfoil, high temp gaskets, high temp packing, steam packing, cryogenic seals, hydraulic seals, pump, o-rings, seats, ribbon pack, gaskets, gasketing, and other sealing products. COMPRESSION PUMP SHAFT, VALVE STEM , VALVE STEM, NON-ASBESTOS GASKETING, PUMP SHAFT SEALS, HIGH TEMP GASKETS, HIGH TEMP bolt, CRYOGENIC SEALS, HYDRAULIC SEALS, PUMP, O-RINGS, SEATS, GASKETS, GASKETING, INDUSTRIAL SEAL, FLANGE GASKETS, RING GASKETS, HANDHOLE GASKETS, COMPOSITE MATERIAL, FLANGE, METAL GASKET, SEAL RING, BONNET SEAL, THERMAL, TURBO, NUCLEAR, off-shore, cranes, slew ring

Maxbolt load indicating bolts verifies the actual clampload.  Torque Wrenches are no longer needed.  Superbolt and rotabolt are good products.  However, superbolt and rotabolt can only verify one set value.  DTI washers only verify one set load.  Maxbolt load indicating fasteners continuously verify the actual tension load or clampload.  These are the new generation of load indicating bolts.  More robust than your load cells.  Can stand up to the elements more than load cells.  Load cells are for laboratories, Maxbolts are for industry use.  Why Maxbolts are better?